350M - PH3 0.01-20 ppm - Diffuse
350M - PH3 0.01-20 ppm - Diffuse
Product description
The Uniphos 350M phosphine alert gas monitor is a microprocessor based hand held instrument developed for the purpose of detection & monitoring of the target gas concentration on the hazardous locations. It employs gas sensor & advance electronic circuits. Gas sensor, when exposed to the target gas, produces current signal proportional to the gas concentration. This current signal is amplified by the electronic circuits, then digitized and shown on the alphanumeric LCD panel by the microprocessor.
Applications
- Fumigation
Specifications
Sensors | Electrochemical |
Range | 0 - 20 ppm |
Resolution | 0.01 ppm |
Accuracy | Inherently +/- 2% (but also depends on the calibration gas & method) |
Drift | Less then 2% of the signal per month at constant temperature and pressure. |
Gas sampling | Diffusion type |
Alarm set point | 1) Two alarm set point viz. Low and High which are user settable 2) Visual yellow and red LED indication for Low and High alarm |
Data Storage | Can store upto 1000 records with date, time, gas concentration and alarm set points. |
Power source | 3.7V, 2200mAH/ Li-ion battery pack |
Runtime | 8-10 hours when battery full charged. |
Data Transfer/Print | Bluetooth (wireless) or Serial (wired) communication from instrument to computer or printer. |
Function keys | UP, DOWN, SET & ENTER |
Operating temperature | -10 to 50 C |
Display | 8X2 Alphanumeric OLED display |
Instrument Enclosure | ABS Plastic |
Size | Height = 130 mm, Width 1 = 69 mm, Width 2 = 63 mm, Depth = 30 mm |
Weight | Approx 250 grams |
Relative post | Xem tất cả
- ToxiRAE III
- GazEx Explosion Meter
- GazTox Single Gas Detector
- FumiSense PRO - PH3 0-2000ppm- Pumped
- FumiSense PRO - PH3 (no CO cross sens.) 0-1000ppm - Pumped
- Fumispec-Lo for measuring SO2F2
- Fumispec-Hi for measuring SO2F2
- FumiTrack online - PH3 0 - 2000 ppm - 4 ports pumped
- FumiSense PRO - PH3 0-2000ppm- Pumped